User guide

Heater Control for Windows 4-3
Each loop has a dialog box which shows its settings under the Main tab.
Figure 4-2 shows the Main tab dialog box and the tabs to access more dialog boxes. In
the Main dialog box, you set the temperature with Set Point. The Output Value is the
percentage of the heater’s total capacity that is being used to achieve or maintain the
Set Point. Auto Mode regulates the loop temperature automatically. Manual Mode
disables the automatic temperature controller and allows you to regulate loop
temperature using the Output Value.
?NOTE Operating in Manual Mode is not recommended. Output Value can not
exceed Heat Output Limit. See the Output tab.
Figure 4-2
• From the Main tab, select the Run Time tab.
Tabs for Accessing
Other Windows.
The Selected
Loop Number
and Name
Appears in this
Dialog Box.
Temperature and
Turn-on Settings.