User guide

3-24 Tour of Fluidmove
Run Window
This window contains system controls for starting, stopping or pausing the run and access to
the SECS/GEM interface control. All fluid information entered from the Setup Fluid dialog
box from the Configuration menu is shown in this window along with real-time fluid statistics
such as a running timer of the pot life and thaw time since the beginning of the run. The Run
Window shows the run statistics such as number of boards, run-time and failure counts. Also
a warning box at the bottom of the screen alerts the operator to system conditions.
The screen shown in Figure 3-22 is what the operator sees during production runs. If
you have a SECS/GEM Interface Option, you will see the see SECS/GEM tab.
Figure 3-22
Fluid Information
and Statistics
Messages to Operator
about System Status
Run Control Commands for
the Dispensing System