User guide

3-4 Tour of Fluidmove
If your system configuration includes a Matrox card, the following additional program groups
are created:
Figure 3-3
The FMW program group, as shown in Figure 3-1, contains the FMW application, the Heater
Control for Windows (HCW) application, the Dispense Out debugging application, a DOS
Prompt icon and a ReadMe file.
• HCW controls the heaters and cooling devices on equipped systems.
• Dispense.Out opens a text file where all debugging information is recorded. For
more information on this, contact Asymtek Technical Support.
• The ReadMe file contains setup instructions for FMW after initial installation or an
upgrade. It also provides a list of known bugs and workaround solutions for them.
• The Cognex Vision Processor program group is used to operate the Cognex Vision
System.
The Video Blaster program group, shown in Figure 3-2, and the Matrox program groups,
shown in Figure 3-3, are optional video mixers for the advanced vision system, AV-2550
Automatic Fiducial Locating System.