User guide

Beginning Programming 8-17
ZFast Mode
ZFast is an option that allows fluid to begin flowing through the pump as soon as the
dispensing head begins moving to the dispensing location within the Z-axis. Once the
dispensing head reaches the dispense height, the pump remains on until the dot is completed.
This feature is applicable only to dots and is not functional in Height Sense Always mode.
To activate the ZFast mode:
1. In the Programming window, place the cursor on the command before which the
ZFast command should appear.
2. Select Set ZFast Mode from the Program menu.
> A drop-down menu apears, offering you the selections of ZFast ON or ZFast
OFF.
3. From the drop-down menu, select ZFast ON.
> The ZFast instruction has been placed into the program. You can now edit the
ZFast status from within the program by double-clicking on the ZFast
command.