User guide

Beginning Programming 8-9
To program weight control lines:
1. Perform the Programming Setup in Chapter 6 - Setup and Configuration.
> Load Side 1 of the Tutorial Board.
> When you create the Workpiece, define the Workpiece Alignment.
> Choose No Fiducials.
2. Click on Dispensing Elements on the Program Commands toolbar.
> A Teach Window opens.
3. Click on Weight Control Lines.
> Notice, as shown in Figure 8-3, that the Teach Window has additional text
boxes below the video display specifically for weight control lines.
Figure 8-3
4. Type 20 mg in the Total Weight text box.
> Entering 20 mg means that 20 mg of fluid will be dispensed along the length of
the line you will now define.
Customized
Dialogs for
Weight-control
Line
Specification