Specifications

GGeenneerraall DDiimmeennssiioonnss SSRR--8800 SSRR--7700
Machine width: 72 in. / 1,829 mm 66 in. / 1,676 mm
Ground clearance: 15 in. / 381 mm 15 in. / 381 mm
Max. lift height, at hinge pin: 125 in. / 3,175 mm 125 in. / 3,175 mm
Machine length, w/out bucket: 112 in. / 2,845 mm 112 in. / 2,845 mm
Machine length, with bucket: 142 in. / 3,607 mm 141 in. / 3,581 mm
Height to top of ROPS: 86 in. / 2,184 mm 86 in. / 2,184 mm
TTrraacckk SSppeecciiffiiccaattiioonnss
Track width: 20 in. / 508 mm 15 in. / 381 mm
Length of track on ground: 71 in. / 1,803 mm 71 in. / 1,803 mm
Ground contact area: 2,840 in.2 / 1.83 m2 2,130 in.2 / 1.37 m2
MMaacchhiinnee WWeeiigghhtt
**Operating weight with bucket: 8,972 lb / 4,070 kg 7,890 lb / 3,579 kg
Shipping weight without bucket: 8,060 lb / 3,656 kg 7,315 lb / 3,318 kg
**Ground pressure: 3.15 psi / 21.7 kPa 3.70 psi / 25.51 kPa
EEnnggiinnee
Model: Perkins 804C-33T Perkins 804C-33T
Type: 4-cylinder diesel, turbo 4-cylinder diesel, turbo
Displacement: 201.4 in.3/3.3 liter 201.4 in.3/3.3 liter
Gross HP @ 2800 rpm: 80.5 hp / 60 kW 71 hp / 53 kW
Torque (peak): 186 ft-lb / 253 Nm 173 ft-lb / 234 Nm
OOppeerraattiinngg SSppeecciiffiiccaattiioonnss
Operating capacities:
*Tipping load: 6,200 lb / 2,812 kg 5,500 lb / 2,495 kg
*35% tip load: 2,170 lb / 984 kg 1,925 lb / 873 kg
*50% tip load: 3,100 lb / 1,406 kg 2,750 lb / 1,247 kg
Maximum speed low (high) range: 7(12.5) mph / 12.5(20) kmh8 mph / (12.9) kmh
AAuuxxiilliiaarryy HHyyddrraauulliicc PPuummpp
Low flow, max.: 20 gpm / 75.7 lpm 20 gpm / 75.7 lpm
High flow, max.: 30 gpm / 113.6 lpm 30 gpm / 113.6 lpm
Pressure: 3,000 psi / 20,670 kPa 3,000 psi / 20,670 kPa
SSeerrvviiccee RReeffiillll CCaappaacciittiieess
Fuel tank: 18 gal / 68 L 18 gal / 68 L
(Dry system: 21 gal.) ***Hydraulic tank: 12.25 gal / 46.4 L 12.25 gal / 46.4 L
***Engine coolant: 3 gal / 12 L 3 gal / 12 L
***Engine oil, including filter: 9 qt / 8.52 L 9 qt / 8.52 L
Specifications are subject to change without notice.
* SAE J818 standards define operating capacities of rubber-tired skid steers (50%
tipping load) and tracked loaders (35% tipping load). There are no standards
defining the operating capacity of machines equipped with a suspended
undercarriage or machines with rubber tracks.
** Bucket installed, fluid levels full, 165 lb. operator seated in cab.
*** When replacing or replenishing fluids, it is recommended that you specify genuine ASV Posi-Lube
TM
products from your ASV dealer.
MMAACCHHIINNEE SSPPEECCIIFFIICCAATTIIOONNSS
63