Specifications

CONTROLS
Throttle/Electric Attachment
18
Throttle Controls
The throttle controls engine
RPM. When performing work
that requires delicate, precise
movements, use a lower RPM.
When more speed, horsepower,
or flow is required, use a higher
RPM.
The SR 70/80 are equipped with
foot operated throttle mecha-
nisms.
• To increase engine RPM,
press the front (toe) of the
foot pedal slowly towards the
floor until the desired rpm has
been reached.
• To decrease RPM, press the
rear (heel) of the pedal
towards the floor.
Electric Attachment Control
Most attachments for ASV
Rubber Track Loaders are con-
trolled hydraulically, but some
require electrical input as well.
When electrical input is required,
the four buttons on the drive
control (left) joystick can be uti-
lized to send electrical current to
the receptacle located on the
upper left side of the lift arms.
Note: ASV receptacle style and
pin designation may differ from
those utilized by other manufac-
turers. To ensure proper func-
tion, use only ASV approved
attachments.
Buttons
Throttle