User Guide

20
Reminder: If you choose to display the local temperature, the system will use your current
IP address to determine the temperature at your present location. The results of this may
vary, depending on your exact location.
Reset Button
If for some reason you cannot connect to your NAS, this button can be used to return a portion of the
settings to their default values.
The system administrator account (admin) password will be reset back to “admin”.
The system HTTP and HTTPS ports will be reset back to 8000 and 8001 respectively.
The system will revert to automatically obtaining an IP address. You can then use ASUSTOR Control
Center to search for your NAS.
ADM Defender will be reset and will allow all connections.
Reminder: You must hold the reset button down until you hear a "beep" for the settings
mentioned above to be reset.