User Guide

17
Hardware
Note: This function may differ depending on the NAS model in use.
Here you can configure settings for the LED indicators, buzzer, hard disk hibernation, power usage, fan
speed and LCD display panel.
System: Here you can choose to disable any of the LED indicators to save power. By selecting
"night mode", only the system power LED indicator will be enabled. It will flash an orange light every
10 seconds. "Night mode scheduling" will allow you to configure the start time and duration of night
mode. You can also configure settings for the buzzer, reset button and infrared receiver here.
Disk Hibernation: Your hard disks will enter hibernation mode when left idle for the period of time
specified here. Once in hibernation, the hard disk LED indicator on the front of the disk tray will flash