Installation Manual

13
Securing the Power Cord
Note: You can use the provided cord bracket to secure the power cord in place, if you are concerned
about the NAS power cord becoming detached when the NAS is moved.
1. Take the cord bracket out of the accessories box.
2. Attach the bracket to the power cord as shown in the graphic below.
3. Remove the fan screw by unscrewing it counter-clockwise.
AS1002T / AS1002T v2 AS1004T / AS1004T v2
4. Position the bracket over the hole for the removed fan screw. Secure the bracket in place by replacing the
fan screw.
AS1002T / AS1002T v2