User guide

ASUSTOR NAS User Guide
Page 8 of 52
Reset Button
If for some reason you cannot connect to your NAS, this button can be used to
return a portion of the settings to their default values.
 The system administrator account (admin) password will be reset back to
“admin”.
 The system HTTP and HTTPS ports will be reset back to 8000 and 8001
respectively.
 The system will revert to automatically obtaining an IP address. You can then
use ASUSTOR Control Center to search for your NAS.
 ADM Defender will be reset and will allow all connections.
Reminder: You must hold the reset button down until you hear a "beep" for the
settings mentioned above to be reset.
2.1.6. Notification
You can configure this setting to send you notification immediately in the event that the
system encounters any problems.
 Send: Here you can set the accounts that will be used for sending e-mail or SMS
notifications. Multiple accounts can be set up but only one may be used as the
primary account.
 Receive: Here you can set up the accounts that will be used to receive e-mail and
SMS notifications. You can also set the type of system notifications that will be
received by these accounts.
 Push Notification: Here you can enable the push notification setting for the AiMaster
mobile app which can be downloaded from the Apple App Store or Google Play.
When designated system events occur, your ASUSTOR NAS will immediately send
notification to the Apple/Google push notification server which will then forward it to
your mobile device.
About Push Notification
If you wish to use this feature, you must first install AiMaster on your mobile device
and enable push notifications on the device. Currently, AiMaster is available for both
iOS and Android devices.