Manualshelf

Installation Manual

ManualsBrandsAsustor ManualsComputers & AccessoriesDrivestor 4 Pro AS3304T - 4 Bay NAS, 1.4GHz Quad Core, 2.5GbE Port, 2GB RAM DDR4, Network Attached Storage (Diskless)
12345678910
10
2. Connect the NAS to your router, switch or hub using an Ethernet cable.
3. Press and hold down the power button for 1 – 2 seconds until the blue power LED indicator is lit. This indicates that the
NAS is now powered on. While the NAS is being powered on, the green system status LED indicator will flash and the
blue network LED indicator will be lit as well.
AS3302T AS3304T
4. The NAS is ready for operation once the green system status LED indicator has stopped flashing and remains steadily
lit. At this time, you should also hear a ‘beep’ from the system buzzer. Hardware installation is now complete. Please
move on to the software installation guide to configure your system settings.