User Guide

Getting Started with ASUSTOR Data

Master (ADM)

This section will introduce you to the process of logging in, using Searchlight and using the

taskbar in ASUSTOR Data Master (ADM).

Installing ASUSTOR NAS and ADM

Before you begin using your NAS, please make sure that you have installed hard disks,

connected the NAS and have properly initialized it. For detailed instructions on setting up your

ASUSTOR NAS and installing ADM, please see the

Quick Installation Guide

for your ASUSTOR

NAS model.

Logging in to ASUSTOR Data Master

After installation and initialization, you can use the following methods to log in to your

ASUSTOR NAS:

Connection within the local network (LAN )

Method 1： Use ASUSTOR Control Center (ACC) to scan your local area network for ASUSTOR

NAS devices. Select your NAS and then click on the “Open” button to go to bring up the login

screen. ACC can be downloaded from Downloads

Method 2：

If you already know the IP address for your ASUSTOR NAS on your local area network,

you can directly enter it into your web browser to connect to your NAS. For example:

http://172.16.1.69:8000/

(The 8000 in the image is the default port)

Quick Installation Guide

https://www.asustor.com/service/downloads

Chapter