User Manual

98
Chapter 4: Caring for your Zenbo
NOTE: Remove the power adapter and power cord before cleaning your Zenbo.
Please use a damped sponge or cloth to wipe your Zenbo, and use a dry cloth to dry
Zenbo before powering on.
When the front and rear wheels on the bottom of Zenbo becomes clogged, please
follow the steps below to remove and clean the wheels:
1. Place Zenbo on a flat and stable surface, put a soft cloth on the surface to prevent
scratching the screen, then turn Zenbo over as shown below.
2. Use a hex wrench to remove the front and rear wheels.
Chapter 4:
4
Caring for your Zenbo