User Manual

Chapter 2: Getting to know Zenbo

Projecting Zenbo’s screen to a TV

You can use a Chromecast to wirelessly project Zenbo’s screen to your TV

Please follow the steps below to set up your Chromecast:

1. Make sure that your Chromecast and Zenbo are both connected to the same wireless

network.

2. Connect your Chromecast to a power source and connect it to your TV’s HDMI

port.

3. Use your TV’s remote control and select the video source as the HDMI port that

you have connected the Chromecast.

4. Make sure picture is displayed on your TV and the name of your Chromecast is

displayed on the bottom left corner.

After setting up your Chromecast, please follow the steps below to set up your

Zenbo:

1. Say “Hey Zenbo” to trigger listening mode.

2. Make sure the blue lights show up on both sides of Zenbo’s face.

3. Say “我要投影” to Zenbo.

NOTE: Say “Hey Zenbo，結束投影” to Zenbo to end the projection.

NOTE: If you have two or more Chromecast devices, Zenbo will display all the devices

that it detects on its screen, tap a device name or use voice command to say the device

number to start projecting.

4. Make sure that Zenbo’s screen id projected to the TV.

5. After Zenbo’s screen is projected successfully, you can continue using Zenbo as

normal and all the video and audio will be projected to your TV.