User Guide E12130 E12130_ZE553KL_Booklet_EU_UM.
First Edition/ November 2016 Model: ASUS_Z01HD (ZE553KL) ASUS_Z01HDA (ZE553KL) Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device. NOTE: For the latest updates and more detailed information, please visit www.asus.com. Front features Proximity sensor and light sensor LED indicator Receiver E12130_ZE553KL_Booklet_EU_UM.
Side features Microphone Nano SIM1, Nano SIM2 / MicroSD combo card slot Volume Key Power Key Audio jack Speaker Microphone USB Type-C port NOTE: The USB Type-C port supports USB2.0 transfer rate. E12130_ZE553KL_Booklet_EU_UM.
Rear features Rear cameras E12130_ZE553KL_Booklet_EU_UM.
Charging your ASUS Phone To charge your ASUS Phone: 1. Connect the USB connector into the power adapter’s USB port. 2. Connect the other end of the USB Type C cable to your ASUS Phone. 3. Plug the power adapter into a wall socket. 3 2 1 IMPORTANT! • When using your ASUS Phone while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible.
Installing a Nano SIM / MicroSD card To install a Nano SIM / MicroSD card: 1. Push a pin into the hole on the Nano SIM / MicroSD card tray to eject it. 2. Insert the Nano SIM / MicroSD card(s) into the card slot(s). Nano-SIM1 Micro SD Nano-SIM1 Nano-SIM2 IMPORTANT: You can only use the Nano SIM2 card or the MicroSD card at a time. 3. Push the tray to close it. E12130_ZE553KL_Booklet_EU_UM.
NOTES: • • The Nano SIM card slots support LTE, WCDMA and GSM/EDGE network bands. The MicroSD card slot supports MicroSD and MicroSDHC card formats. IMPORTANT: Both Nano SIM card slots support 3G WCDMA/ 4G LTE network band. But only one SIM card can connect to 4G LTE service at a time. CAUTION! • • Do not use sharp tools or solvent on your device to avoid scratches on it. Use only a standard Nano SIM card on your ASUS Phone.
Federal Communications Commission Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Canada, Industry Canada (IC) Notices This device complies with Industry Canada’s licence-exempt RSS standard(s).
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792. html Informations concernant l’exposition aux fréquences radio (RF) La puissance de sortie émise par cet appareil sans fil est inférieure à la limite d’exposition aux fréquences radio d’Industrie Canada (IC). Utilisez l’appareil sans fil de façon à minimiser les contacts humains lors du fonctionnement normal.
antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées. La fonction de sélection de l’indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada. The IC ID for this device is 3568A-Z01HD. L’identifiant Industrie Canada de cet appareil est: 3568A-Z01HD. RF Exposure Information (SAR) This device has been tested and meets applicable limits for Radio Frequency (RF) exposure.
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: MSQZ01HD. NOTE: The FCC statement and IC notices are for ASUS_Z01HD only.
CE marking for devices with wireless LAN/ Bluetooth This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity. The highest CE SAR values for the device are as follows: • 0.558 W/Kg@10g (Head) / 1.55 W/Kg@10g (Body) for ASUS_Z01HD • 0.426 W/Kg@10g (Head) / 1.
Using GPS (Global Positioning System) on your ASUS Phone To use the GPS positioning feature on your ASUS Phone: • Ensure that your device is connected to the Internet before using Google Map or any GPS-enabled apps. • For first-time use of a GPS-enabled app on your device, ensure that you are outdoors to get the best positioning data. • When using a GPS-enabled app on your device inside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance.
Safety information ASUS Phone care • Use your ASUS Phone in an environment with ambient temperatures between 0 °C (32 °F) and 35 °C (95 °F). The battery WARNING: Disassembling the battery by yourself will void its warranty and may cause serious harm. Your ASUS Phone is equipped with a high performance non-detachable Li-polymer battery. Observe the maintenance guidelines for a longer battery life. • • • Do not remove the non-detachable Li-polymer battery as this will void the warranty.
• Do not remove and dispose of the battery with your regular household waste. Take it to a hazardous material collection point. • Do not touch the battery terminals. • To avoid fire or burns, do not disassemble, bend, crush, or puncture the battery. NOTES: • • Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the instructions. The charger • Use only the charger supplied with your ASUS Phone.
Operator access with a tool If a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible to the OPERATOR by the use of the same TOOL, or such compartments shall be marked to discourage OPERATOR access. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment.
Proper disposal Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
ed d ns. e. al d to ling. d l, EU Declaration of Conformity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR.
DECLARATION UE DE CONFORMITE Nous, soussignés Fabricant: ASUSTeK COMPUTER INC. Adresse: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Représentant autorisé en Europe: ASUS COMPUTER GmbH Adresse, ville: HARKORT STR.
Declaração CE de Conformidade Nós, os abaixo-assinados, Fabricante: ASUSTeK COMPUTER INC. Endereço: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Representante autorizado na Europa: ASUS COMPUTER GmbH Endereço, cidade: HARKORT STR.
EU Uygunluk Beyanı Biz, bu imza altındakiler Üretici: ASUSTeK COMPUTER INC. Adres: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Avrupa’daki Yetkili: ASUS COMPUTER GmbH Adres, Şehir: HARKORT STR.
ASUS Address: 4F, 150 Li-Te Road, Peitou, Taipei, Taiwan Tel: 886228943447 Fax: 886228907698 Declaration We declare that the IMEI codes for this product, ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards. Should you have any questions or comments regarding this matter, please contact us.
