User Guide E11690
First Edition/ May 2016 Model:ASUS_Z01FD Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device. NOTE: For the latest updates and more detailed information, please visit www.asus.com.
Side features Audio jack Microphone Micro SIM, Nano SIM/ microSD combo card slot Volume key Power key Microphone Speaker USB Type C port NOTE: The USB Type-C port supports USB2.0 transfer rate.
Rear features NFC detaction aera RGB sensor / Camera flash Laser focus Rear camera Fingerprint sensor Rear cover Charging your ASUS Phone To charge your ASUS Phone: 1. Connect the USB connector into the power adapter’s USB port. 2. Connect the other end of the USB Type C cable to your ASUS Phone. 3. Plug the power adapter into a wall socket.
3 2 1 IMPORTANT! • When using your ASUS Phone while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible. • When charging your ASUS Phone through your computer, ensure that you plug the USB Type C cable to your computer’s USB 2.0 / USB 3.0 port. Avoid charging your ASUS Phone in an environment with ambient temperature of above 35 °C (95 °F). • NOTES: • Use only the power adapter that came with your device.
Installing a Micro SIM / Nano SIM / MicroSD card To install a Micro SIM / Nano SIM / MicroSD card: 1. Push a pin into the hole on the Micro SIM / Nano SIM / MicroSD card tray to eject it. 2. Insert the Micro SIM / Nano SIM or MicroSD card(s) into the card slot(s). Micro-SIM1 Micro SD Micro-SIM1 Nano-SIM2 IMPORTANT: You can only use the Nano SIM card or the MicroSD card at a time.
3. Push the tray to close it NOTES: • • The Micro SIM / Nano SIM card slots LTE, WCDMA and GSM/EDGE network bands. The microSD card slot supports microSD and microSDHC card formats. IMPORTANT: Both Micro SIM and Nano SIM card slots support 2G GSM/EDGE, 3G WCDMA and 4G LTE network bands. But only one SIM card can connect to 3G WCDMA / 4G LTE network service at a time. CAUTION! • Do not use sharp tools or solvent on your device to avoid scratches on it.
FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
CAUTION! Changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. Hearing Aid Compatibility Information This phone has been tested and rated for use with hearing aids for some of the wireless technologies it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids.
Industry Canada Statement This device complies with RSS-247 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Avis d’industrie Canada Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
RF Radiation Exposure Statement For body worn operation, this phone has been tested and meets RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with RF exposure guidelines.
To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep this device away from your head and body. Carry this device at least 10 mm away from your body to ensure exposure levels remain at or below the as-tested levels. Choose the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this manner.
European Standard EN 62209-2, for use with dedicated accessories. SAR is measured with this device at a separation of 0.5 cm to the body, while transmitting at the highest certified output power level in all frequency bands of this device. Use of other accessories which contain metals may not ensure compliance with ICNIRP exposure guidelines.
Using GPS (Global Positioning System) on your ASUS Phone To use the GPS positioning feature on your ASUS Phone: • Ensure that your device is connected to the Internet before using Google Map or any GPS-enabled apps. • For first-time use of a GPS-enabled app on your device, ensure that you are outdoors to get the best positioning data. • When using a GPS-enabled app on your device inside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance.
• Never try to open the battery as it contains substances that might be harmful if swallowed or allowed to come into contact with unprotected skin. • Do not remove and short-circuit the battery, as it may overheat and cause a fire. Keep it away from jewelry or metal objects. • Do not remove and dispose of the battery in fire. It could explode and release harmful substances into the environment. • Do not remove and dispose of the battery with your regular household waste.
• Do not use the ASUS Phone in an extreme environment where high temperature or high humidity exists. The ASUS Phone performs optimally in an ambient temperature between 0 °C (32 °F) and 35 °C (95 °F). • Do not disassemble the ASUS Phone or its accessories. If service or repair is required, return the unit to an authorized service center. If the unit is disassembled, a risk of electric shock or fire may result. • Do not short-circuit the battery terminals with metal items.
Proper disposal Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
ASUS Address: 4F, 150 LI-TE RD., PEITOU, TAIPEI, TAIWAN Tel: 886228943447 Fax: 886228907698 Declaration We declare that the IMEI codes for this product, ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards. Should you have any questions or comments regarding this matter, please contact us.
