Important Notices
First Edition January 2015 Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Safety information ASUS Phone care • • • • Do not leave your ASUS Phone exposed to strong sunlight or excessive heat for a prolonged period. This may damage it. Do not handle your ASUS Phone with wet hands or expose it to moisture or liquids of any kind. Continuous changes from a cold to a warm environment may lead to condensation inside your ASUS Phone, resulting in corrosion and possible damage. If you pack your ASUS Phone in your suitcase during travel, beware of damage.
The battery Your ASUS Phone is equipped with a high performance non-detachable Li-Ion battery. Observe the following maintenance guidelines for a longer battery life: • • • • • • • Avoid charging in extremely high or low temperature. The battery performs optimally in an ambient temperature of +5 °C to +35 °C. Do not remove and replace the battery with a non-approved battery. Do not remove and immerse the battery in water or any other liquid.
• Do not touch the battery terminals. CAUTION: • Risk of explosion if battery is replaced by an incorrect type. • Dispose of used batteries according to the instructions. The charger • Use only the charger supplied with your ASUS Phone. • Never pull the charger cord to disconnect it from the power socket. Pull the charger itself. Cleaning and storing • • • Your ASUS Phone should always be handled with care and protected from dirt, dust and dampness.
• • • charge the battery and store your ASUS Phone in a dry place away from direct sunlight. Your ASUS Phone should be switched off during storage. Recharge every 6 to 12 months. Never expose your ASUS Phone to heat or strong sunlight. Never expose your ASUS Phone to moisture or liquids of any kind. Do not place stickers that may block the keypad or affect other components such as the microphone, earpiece, or camera lens.
recommend the use of a cradle while using any form of handsfree accessory. While driving, we recommend that you use voicemail wherever possible, and that you listen to your messages when you are not in the car. If you must make a handsfree call when driving, keep it brief. Do not place objects, including both installed or portable wireless equipment, in the area over the airbag or in the airbag deployment area. An airbag inflates with great force. If the airbag inflates, serious injury could result.
If you have a pacemaker: • Always keep your ASUS Phone more than six inches (15cm) from your pacemaker when turned on. • Do not carry your ASUS Phone in your breast pocket. • Use the ear opposite the pacemaker to minimize the potential for interference. • If you have any reason to suspect that interference is taking place, switch off your ASUS Phone immediately. Hearing aids Some digital phones may interfere with some hearing aids.
Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment added to your vehicle. Posted facilities Turn your ASUS Phone off where posted notices so require. Magnetic media Magnetic fields generated by mobile devices may damage data on magnetic storage media, such as credit cards, computer discs or tapes.
Blasting areas To avoid interfering with blasting operations, turn your ASUS Phone off when in a ‘blasting area’ or in areas posted: “Turn off two-way radio.” Obey all signs and instructions. Potentially explosive environments Turn your ASUS Phone off when in any area with a potentially explosive environment and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
Caution Your ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the (1) AC Adapter. • • • • • • • Do not use the ASUS Phone in an extreme environment where high temperature or high humidity exists. The ASUS Phone performs optimally in an ambient temperature between -15 °C (5 °F) and 35 °C (95 °F). Do not abuse the ASUS Phone. Avoid striking, shaking, or subjecting the device to impact.
• surface, and the user suspects damage, take it to a service center for inspection. The phone shall only be connected to CTIA certified adapters, products that bear the USB-IF logo or products that have completed the USB-IF compliance program.
Federal Communication Commission Interference Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
• • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
tested for use at the ear is 0.52 W/ kg and when worn on the body, as described in this user guide, is 1.18 W/ kg (Body-worn measurements differ among device models, depending upon available accessories and FCC requirements.) While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement.
The maximum SAR value when using the headset for each frequency band is listed below: Band Position Head Body (1.0cm GSM850 Gap) Hotspot (1.0cm Gap) Head Body (1.0cm GSM1900 Gap) Hotspot (1.0cm Gap) Head Body (1.0cm WCDMA II Gap) Hotspot (1.0cm Gap) Head Body (1.0cm WCDMA V Gap) Hotspot (1.0cm Gap) Head Body (1.0cm LTE 2 Gap) Hotspot (1.0cm Gap) SAR 1g (W/kg) 0.33 0.57 1.15 0.22 0.32 0.66 0.39 0.57 0.67 0.33 0.57 0.57 0.30 0.51 0.
Band LTE 4 LTE 5 LTE 7 LTE 17 2.4G WLAN Bluetooth Position Head Body (1.0cm Gap) Hotspot (1.0cm Gap) Head Body (1.0cm Gap) Hotspot (1.0cm Gap) Head Body (1.0cm Gap) Hotspot (1.0cm Gap) Head Body (1.0cm Gap) Hotspot (1.0cm Gap) Head Body (1.0cm Gap) Hotspot (1.0cm Gap) Head Body (1.0cm Gap) Hotspot (1.0cm Gap) SAR 1g (W/kg) 0.52 1.18 1.23 0.29 0.37 0.38 0.13 0.26 0.26 0.24 0.45 0.45 0.48 0.38 0.
Hearing Aid Compatibility (HAC) This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise.
judged unacceptable by the hearing aid user. WHAT IS HEARING AID COMPATIBILITY? The Federal Communications Commission has implemented rules and a rating system designed to enable people who wear hearing aids to more effectively use these wireless telecommunications devices. The standard for compatibility of digital wireless phones with hearing aids is set forth in American National Standard Institute (ANSI) standard C63.19.
“M4” rating. A digital wireless phone is considered Hearing Aid Compatible for inductive coupling (telecoil mode) if it has a “T3” or “T4” rating. The tested M-Rating and T-Rating for this device (FCC ID: MSQZ00D) are M3 and T3. HOW WILL I KNOW IF MY HEARING AID WILL WORK WITH A PARTICULAR DIGITAL WIRELESS PHONE? You’ll want to try a number of wireless phones so that you can decide which works the best with your hearing aids.
ASUS Address: 4F, No. 150 Li-Te Road, Peitou, Taipei, Taiwan Tel: 886228943447; Fax: 886228907698 Declaration We declare that the IMEI codes for this product, Z00D, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards. Should you have any questions or comments regarding this matter, please contact us.
15060-53600000
