User Guide E9995
E9995 First Edition January 2015 Model: Z00D (ZE500CL) Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Thank you for purchasing this ASUS product! Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device. NOTE: For the latest updates and more detailed information, please visit www. asus.com.
Side features Audio jack Power key Groove Microphone Micro USB port NOTE: Pry open the rear cover from the groove.
Rear features Rear camera Flash Volume key Rear cover Speaker NOTES: • Remove the rear cover to display the micro SIM and microSD card slots. • The micro SIM card slot supports WCDMA, DC-HSPA, GSM/EDGE, and FDD-LTE network bands. The microSD card slot supports microSD and microSDHC card formats.
Charging your ASUS Phone After installing your micro SIM card, we strongly recommend that you charge your device fully before powering it ON. To charge your ASUS Phone: 1. Connect the USB connector into the power adapter’s USB port. 2. Connect the other end of the micro USB cable to your ASUS Phone. 3. Plug the power adapter into a wall socket.
NOTES: • Use only the power adapter that came with your device. Using a different power adapter may damage your device. • Using the bundled power adapter and ASUS Phone signal cable to connect your ASUS Phone to a power outlet is the best way to charge your ASUS Phone. The input voltage range between the wall outlet and this adapter is AC 100V - 240V. The output voltage of the micro USB cable is DC 5.2V, 1.35A.
Turning your ASUS Phone on or off Press the power key at the top of your ASUS Phone to power the device on or to power it off. Power key IMPORTANT: The first time you power on your ASUS Phone, you will see the Welcome screen. Touch the menu to select your preferred language then touch Next Step. Follow the onscreen instructions to set up your ASUS Phone.
Installing a micro SIM card To install a micro SIM card: 1. Locate the groove on the bottom-right corner of your ASUS Phone. 2. Pry the cover loose and then pull the rear cover off. 3. Insert the micro SIM card into the micro SIM slot.
4. Replace the rear cover. 5. Press down the rear cover on all sides to secure it in place. IMPORTANT: Use only a micro SIM card on your ASUS Phone. A trimmed SIM card may not properly fit into and may not be detected by your ASUS Phone. NOTE: All specifications are subject to change without notice and may vary by country and region. CAUTION: Do not use sharp tools or solvent on your device to avoid scratches on it.
Installing a microSD card To install a microSD card: 1. Locate the groove on the bottom-right corner of your ASUS Phone. 2. Pry the cover loose and then pull the rear cover off. 3. Insert the microSD card into the microSD card slot.
4. Replace the rear cover. 5. Press down the rear cover on all sides to secure it in place. CAUTION: Do not use sharp tools or solvent on your device to avoid scratches on it.
Using GPS (Global Positioning System) on your ASUS Phone To use the GPS positioning feature on your ASUS Phone: • Ensure that your device is connected to the Internet before using Google Map or any GPS-enabled apps. • For first-time use of a GPS-enabled app on your device, ensure that you are outdoors to get the best positioning data. • When using a GPS-enabled app on your device inside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance.
CE RF Exposure Compliance This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. For body-worn operation, this device has been tested and meets the ICNIRP guidelines and the European Standard EN 62209-2, for use with dedicated accessories. SAR is measured with this device at a separation of 1.
Specific Absorption Rate (SAR) Band Position SAR 10g GSM900 Head 0.269 Body (1.5cm Gap) 0.429 Head 0.194 Body (1.5cm Gap) 0.279 Head 0.140 Body (1.5cm Gap) 0.136 WCDMA VIII Head 0.165 Body (1.5cm Gap) 0.137 LTE 1 Head 0.154 Body (1.5cm Gap) 0.145 Head 0.309 Body (1.5cm Gap) 0.211 Head 0.092 Body (1.5cm Gap) 0.097 Head 0.180 Body (1.5cm Gap) 0.132 Head 0.184 Body (1.5cm Gap) 0.174 2.4G WLAN Head 0.215 Body (1.5cm Gap) 0.103 Bluetooth Head N/A Body (1.
Prevention of Hearing Loss To prevent possible hearing damage, do not listen at high volume levels for long periods. For France, headphones/earphones for this device are compliant with the sound pressure level requirement laid down in the applicable EN 50332-1:2000 and/or EN50332-2:2003 standard required by French Article L.5232-1.
Safety information ASUS Phone care • Do not leave your ASUS Phone exposed to strong sunlight or excessive heat for a prolonged period. This may damage it. • Do not handle your ASUS Phone device with wet hands or expose it to moisture or liquids of any kind. Continuous changes from a cold to a warm environment may lead to condensation inside your ASUS Phone, resulting in corrosion and possible damage. • When traveling, avoid packing the device inside a suitcase.
The battery Your ASUS Phone is equipped with a high performance non-detachable Li-Ion battery. Observe the maintenance guidelines for a longer battery life. • Do not remove the non-detachable Li-on battery as this will void the warranty. • Avoid charging in extremely high or low temperature. The battery performs optimally in an ambient temperature of +5 °C to +35 °C. • Do not remove and replace the battery with a non-approved battery. • Do not remove and soak the battery in water or any other liquid.
NOTES: • • • Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the instructions. Ensure to fully charge the battery before using your ASUS Phone for extended periods. Remember that the power adapter charges the battery as long as it is plugged into a power source. Be aware that it takes much longer to charge the battery when your ASUS Phone is in use. IMPORTANT! Do not leave your ASUS Phone connected to the power source once it is fully charged.
• If cleaning is necessary, turn your ASUS Phone off and wipe carefully with a soft, slightly damp (not wet) cloth. Use a cotton swab to clean the camera lens. Allow your ASUS Phone to dry completely before switching it on. Never use solvents for cleaning. • If you are not going to use your ASUS Phone for some time, fully charge the battery and store your ASUS Phone in a dry place away from direct sunlight. Your ASUS Phone should be switched off during storage. Recharge every 6 to 12 months.
In the interest of safety, we would recommend the use of a cradle while using any form of handsfree accessory. While driving, we recommend that you use voicemail wherever possible, and that you listen to your messages when you are not in the car. If you must make a handsfree call when driving, keep it brief. Do not place objects, including both installed or portable wireless equipment, in the area over the airbag or in the airbag deployment area. An airbag inflates with great force.
• Use the ear opposite the pacemaker to minimize the potential for interference. • If you have any reason to suspect that interference is taking place, switch off your ASUS Phone immediately. Hearing aids Some digital phones may interfere with some hearing aids. In the event of such interference, call ASUS Customer Service to discuss alternatives.
Magnetic media Magnetic fields generated by mobile devices may damage data on magnetic storage media, such as credit cards, computer discs or tapes. Do not place your ASUS Phone next to such media. You should never expose your ASUS Phone to strong magnetic fields as this may cause temporary malfunction. Other Safety Guidelines Aircraft Regulations prohibit using your mobile device while onboard an aircraft. Switch off your ASUS Phone before boarding an aircraft or turn off the wireless connection.
Areas with a potentially explosive environment are often, but not always, clearly marked. They include fuelling areas such as gas stations, below decks on boats, fuel or chemical transfer or storage facilities, vehicles using liquified petroleum gas (such as propane or butane), areas where the air contains chemicals or articles, such as grain, dust, or metal powders, and any other area where you would normally be advised to turn off your vehicle’s engine.
• Do not disassemble the ASUS Phone or its accessories. If service or repair is required, return the unit to an authorized service center. If the unit is disassembled, a risk of electric shock or fire may result. • Do not short-circuit the battery terminals with metal items.
Proper disposal Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
ASUS Address: 15 Li-Te Road, Peitou, Taipei, Taiwan Tel: 886228943447 Fax: 886228907698 Declaration We declare that the IMEI codes for this product, ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards. Should you have any questions or comments regarding this matter, please contact us.
15060-50700000
