User Guide E11709 15060-82600000 E11709_ZB500KG_UM_Booklet_EU.
First Edition/ September 2016 Model: ASUS_X00BD (ZB500KG) Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device. NOTE: For the latest updates and more detailed information, please visit www.asus.com. Front features Receiver Front camera E11709_ZB500KG_UM_Booklet_EU.
Side features Power key Audio jack Groove Micro USB port NOTE: Pry open the rear cover from the groove. E11709_ZB500KG_UM_Booklet_EU.
Rear features Camera flash Rear camera Volume key Rear cover IMP • • Speaker • • NOTES: • Remove the rear cover to display the dual micro SIM and microSD card slots. • The micro SIM card slots support WCDMA and GSM/EDGE network bands. The microSD card slot supports microSD and microSDHC card formats. • E11709_ZB500KG_UM_Booklet_EU.
Charging your ASUS Phone To charge your ASUS Phone: 1. Connect the USB connector into the power adapter’s USB port. 2. Connect the other end of the micro USB cable to your ASUS Phone. 3. Plug the power adapter into a wall socket. 3 2 1 IMPORTANT! • Your ASUS Phone comes partially charged but you must charge it fully before using it for the first time. Read the important notices and cautions before charging your device.
Installing a micro SIM card To install a micro SIM card: 1. Locate the groove on the bottom-right corner of your ASUS Phone. 2. Pry the cover loose and then pull the rear cover off. NOT • • CAU • 3. Remove the battery. E11709_ZB500KG_UM_Booklet_EU.
4. Insert the micro SIM card into one of the slots. Micro SIM card 1 Micro SIM card 2 / microSD card combo card slot NOTES: • • The micro SIM card slot 2 is at the lower part of the micro SIM / micro SD combo card slot. Both Micro SIM card slots support 2G/3G WCDMA network bands. But only one micro SIM card can connect to 3G WCDMA service at a time. CAUTION! • Do not use sharp tools or solvent on your device to avoid scratches on it. • Use only a standard micro SIM card on your ASUS Phone.
Installing a microSD card To install a microSD card: 1. Locate the groove on the bottom-right corner of your ASUS Phone. 2. Pry the cover loose and then pull the rear cover off. 3. Remove the battery. 4. Insert the microSD card into the microSD card slot. E11709_ZB500KG_UM_Booklet_EU.
FCC Regulations: This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
RF Exposure Information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm.
While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level.
their box or a label located on the box. The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs. This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses.
CE RF Exposure Compliance This device meets the EU requirements (1999/519/ EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. For body-worn operation, this device has been tested and meets the ICNIRP guidelines and the European Standard EN 62209-2, for use with dedicated accessories. SAR is measured with this device at a separation of 0.
Using GPS (Global Positioning System) on your ASUS Phone To use the GPS positioning feature on your ASUS Phone: • Ensure that your device is connected to the Internet before using Google Map or any GPSenabled apps. • For first-time use of a GPS-enabled app on your device, ensure that you are outdoors to get the best positioning data. • When using a GPS-enabled app on your device inside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance.
Safety information ASUS Phone care • Use your ASUS Phone in an environment with ambient temperatures between 0°C (32 °F) and 35 °C (95 °F). The battery Your ASUS Phone is equipped with a high performance detachable Li-Ion battery. Observe the maintenance guidelines for a longer battery life. • Avoid charging in extremely high or low temperature. The battery performs optimally in an ambient temperature of +5 °C to +35 °C. • Use only ASUS battery.
NOTES: • • Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the instructions. The charger • Use only the charger supplied with your ASUS Phone. • Never pull the charger cord to disconnect it from the power socket. Pull the charger itself. Caution Your ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the (1) AC Adapter.
ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http:// csr.asus.com/english/Takeback.htm for detailed recycling information in different regions. Proper disposal Risk of explosion if battery is replaced by an incorrect type.
EU Declaration of Conformity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR.
UE Declaración de Conformidad Nosotros, los abajo firmantes, Fabricante: ASUSTeK COMPUTER INC. Dirección: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Representante autorizado en Europa: ASUS COMPUTER GmbH Dirección, Ciudad: HARKORT STR.
Declaração CE de Conformidade Nós, os abaixo-assinados, Fabricante: ASUSTeK COMPUTER INC. Endereço: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Representante autorizado na Europa: ASUS COMPUTER GmbH Endereço, cidade: HARKORT STR.
EU Uygunluk Beyanı Biz, bu imza altındakiler Üretici: ASUSTeK COMPUTER INC. Adres: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Avrupa’daki Yetkili: ASUS COMPUTER GmbH Adres, Şehir: HARKORT STR.
ASUS Address: 4F, No.150 Li-Te Rd., Peitou, Taipei, Taiwan Tel: 886228943447 Fax: 886228907698 Declaration We declare that the IMEI codes for this product, ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards. Should you have any questions or comments regarding this matter, please contact us.
