User's Manual

WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual

Setting up default gateway

This section allows to manually setup default gateway of Internet connection.

1. Click

Advanced Setup -> Routing -> Default Gateway

WRRSHQWKHFRQÀJXUDWLRQSDJH

2. By default, automatic assigned default gateway is enabled, that is, the router

accepts the first received gateway assignment from ISP. If your ISP specifies a

gateway, uncheck

Enable Automatic Assigned Default Gateway

and enter the

gateway address.

3. Press

Save/Apply

to save and activate the settings.

Setting up static route

For simple networks that have only one router, you do not need to set up static route.

For more complicated network such as an enterprise network where several routers and

GLIIHUHQWVXEQHWVH[LVW\RXQHHGWRFRQÀJXUHVWDWLFURXWHVVRDVWRGLUHFWWKHQHWZRUN

WUDIÀFFRUUHFWO\

1. Click

Advanced Setup -> Routing -> Static Route

WRRSHQWKHFRQÀJXUDWLRQSDJH

and view the current static route settings. Press

Add

to create a new static route.

 7KHFRQÀJXUDEOHVHWWLQJVLQFOXGH

• Destination Network: input the IP address of destination;

• Subnet Mask: input the subnet mask of destination;

• Use Gateway IP Address: input the gateway network address (optional);

• User Interface: select the interface of your router to which the static route applies.

3. Press

Save/Apply

to save and activate the settings.