User's Manual

WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual
38
7KLVFKDSWHUVKRZVKRZWRFRQÀJXUHRWKHUDGYDQFHGURXWHUIHDWXUHVRI:/J
WAN
Click Advanced Setup -> WAN in the left side menu to enter the WAN setup page. This
page allows you to edit the WAN settings.
LAN
1. Click
Advanced Setup -> LAN
in the left side menu to enter the
Local Area Network
/$16HWXS
page. This page allows to change the IP address and subnet mask of
the router, enables or disables UPnP, IGMP snooping and DHCP server.
The default settings are:
• IP Address: 192.168.1.1
• Subnet mask: 255.255.255.0
• Enable UPnP: Yes
• Enable IGMP Snooping: No
• Enable DHCP Server: Yes
Start IP Address: 192.168.1.2
End IP Address: 192.168.1.254
Lease Time (hour): 24
'+&3VHUYHULVHQDEOHGE\GHIDXOW<RXFDQGHÀQHZKLFKDGGUHVVHVWREHDVVLJQHGWR
the LAN computers by DHCP server.
2. Press
Save
to save the configurations and go on setting up other features. If all
settings are complete, press
Save/ Reboot
to apply the settings and reboot WL-600g.
Advanced settings