User's Manual

WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual
27
0$&ÀOWHU
<RXFDQVHWXS0$&ÀOWHUVWRDOORZRUGHQ\ZLUHOHVVFOLHQWVZLWKNQRZQ0$&DGGUHVVHV
7RVHWXS0$&ÀOWHU
1. Click
Wireless -> MAC Filter
LQWKHOHIWVLGHPHQXWRRSHQWKHFRQÀJXUDWLRQSDJH
 6HOHFWWKHUHVWULFWLRQ PRGHIRUWKHÀOWHUVHOHFW
Allow
to allow the client and deny
the rest; select
Deny
WRGHQ\WKHFOLHQWDQGDOORZWKHUHVW%\GHIDXOWWKHÀOWHULVVHW
to
Disable
which allows all clients. Click
Add
WRFUHDWHDÀOWHU
2. Type the MAC address of the wireless client you want to allow or block.
3. Press
Save/Apply
to save and activate the settings.
Wireless bridge
You can connect WL-600g to other wireless bridges so as to expand your wireless LAN.
This function is also referred to as Wireless Distribution System (WDS).
To set up WDS, the wireless routers must meet the following requirements:
1. Using the same encryption.
2. Working on the same channel.
3. The IP addresses of all wireless bridges are within the same subnet.
4. WDS enabled.
5. For bridging wireless routers, the MAC Addresses of the uplink wireless router must
be saved to the
Remote Bridge List
. For uplink wireless router, MAC addresses of
all bridging router must be saved.
Example:
WL-600g (wireless bridge with Internet access), WL-500gP (wireless bridge),
and WL-500gD (wireless bridge). Refer to the illustration on the next page.
WL-600g WL-500gD WL-500gP
SSID ASUS ASUS ASUS
DHCP server Enabled Disabled Disabled
LAN IP address 192.168.1.1 192.168.1.2 192.168.1.3
Authentication Open Open Open
Encryption WEP-128bit WEP-128bit WEP-128bit
Remote bridge 00:01:00:01:01:02
00:01:00:01:01:03
00:01:00:01:01:01 00:01:00:01:01:01
MAC address 00:01:00:01:01:01 00:01:00:01:01:02 00:01:00:01:01:03
Channel 11 11 11