User's Manual

3. Utilities
46 ASUS Pocket Wireless Router
Chapter 3 - Software Configuration
Enable Firewall? – Selecting “Yes”
enables firewall to apply general SPI
rules. And the following options work
only when firewall is enabled.
Logged Packet Type – This field
indicates what kind of packets
between WAN and LAN will be
logged.
Enable Web Access from WAN – This field allows you to specify the port
used to access Web server of the ASUS Pocket Wireless Router from Internet.
The default value is 8080. If you know the WAN IP address of the Wireless
Router, open your web browser and enter the IP address. For example:
http://140.113.201.1:8080
If you enable the DDNS with an account, please open your web browser
and enter the host name registered in DDNS service provider. For example:
http://wl530g.homelinux.org:8080
Note: The default web browser port 80, is reserved for the Web server
within your local network.
Port of Web Access from WAN - This field allows you to specify the port
used to access the Web server of theASUS Pocket Wireless Router from the
Internet. The default value is 8080.
Internet Firewall (Cont.)
Click an item on the menu to reveal a submenu.
Follow the instructions to set up theASUS Pocket
Wireless Router. Tips are displayed when you
move your cursor over an item.
Basic Config