User's Manual

3. Utilities
36 ASUS Pocket Wireless Router
Chapter 3 - Software Configuration
IP Config
WAN & LAN
Click an item on the menu to reveal a submenu.
Follow the instructions to set up theASUS Pocket
Wireless Router. Tips are displayed when you
move your cursor over an item.
WAN Connection Type
TheASUS Pocket Wireless Router
supports several connection types to
WAN, including Static IP, PPPoE,
PPTP, Automatic IP and BigPond(Telstra).
The WAN setting fields in this page
will differ depending on what kind
of connection type you select.
WAN Mode
Selecting Disabled, WL-530g is as an
AP with 5 ports switch. Selecting
Enabled,WL-530g is a Wireless Router
with 4 ports switch. SelectingAuto, WL-530g becomes a Wireless Router with
4 ports switch when Ethernet cable is attached to WAN port and becomes an
AP with 4 ports switch when Ethernet cable is not attached to WAN port.
WAN IP Setting
These three items are editable only when WAN Connection Type is set as
Static IP or PPTP.
IP Address - This is IP address of the Wireless Router as seen on the remote
network. If you leave it blank, the router will get IP address from DHCP
Server automatically.
Subnet Mask - This is Subnet Mask of the Wireless Router as seen on the
remote network.
Default Gateway - This is the IP address of default gateway that allows
for contact between the Wireless Router and the remote network or host.
WAN DNS Settings
You can set the DNS setting with using any WAN Connection Type (Static
IP, PPPoE, or Automatic IP).