User's Manual
Chapter 2 - Installation
2. Installation
18 ASUS Pocket Wireless Router
2. Installation Procedure
Follow these steps to install the ASUS Pocket Wireless Router.
1. Determine the best location for the ASUS Pocket Wireless Router. Keep
in mind the following considerations:
• The length of the Ethernet cable that connects the ASUS Pocket
Wireless Router to the network must not exceed 100 meters.
•
Try to place the ASUS Pocket Wireless Router on a flat, sturdy surface
as far from the ground as possible, such as on top of a desk or book-
case, keeping clear of obstructions and away from direct sunlight.
• Try to centrally locate the ASUS Pocket Wireless Router so that it will
pro-vide coverage to all of the wireless mobile devices in the area.
Orientating the antenna vertically should provide the best reception.
• Use only the power supply that came with this unit. Other power
supplies may fit but the voltage and power may not be compatible.
2. Wall mounting or vertical standing is also possible.
Warning: It is the responsibility of the installer and users of the
ASUS Pocket Wireless Router to guarantee that the antenna is oper-
ated at least 20 centimeters from any person. This is necessary to
insure that the product is operated in accordance with the RF Guide-
lines for Human Exposure which have been adopted by the Federal
Communications Commission.
4. LAN Connection: Attach one end of an RJ-45 Ethernet cable to the ASUS
Pocket Wireless Router’s LAN port (any one of the four) and attach the other
end to the RJ-45 Ethernet cable to your desktop computer.
5. Power Connection: The ASUS Pocket Wireless Router requires power
from an external power supply. The ASUS Pocket Wireless Router ships
with a UL listed, Class 2 power supply (5V, 2A). Attach one end of the DC
power adapter to the back of the ASUS Pocket Wireless Router and the other
end to a power outlet. The Power LED on the front of the ASUS Pocket
Wireless Router will light up when the unit is powered ON. In addition, the
green LAN or WAN LEDs will turn ON to indicate that the ASUS Pocket
Wireless Router has a physical Ethernet network connection.