User's Manual

3.1.3 Point-to-Point (P2P) Mode
Two SMC WTK-G devices, each in Point-to-Point (P2P) mode, can establish a
wireless connection between two wired networks, as shown in Figure3. The two SMC
WTK-G devices operating in P2P mode do not allow client associations.
To configure the SMC WTK-G deivces to establish a P2P wireless bridge, please
ensure the following:
. • Enter the MAC address of SMC WTK-G P2P_2 device in the P2P MAC address field in the
SMC WTK-G P2P_1 device.
• Enter the MAC address of SMC WTK-G P2P_1 device in the P2P MAC address field in the
SMC WTK-G P2P_2 device.
Figure 3: P2P Wireless Bridge