User's Manual

upgrade.
12.2 Update Password
To change the password, enter the new password in the New Password and Reconfirm
Password fields and click Apply.
12.3 Reboot
To reboot, check the reboot radio and click Apply.
12.4 Reset to Default Setting
To reboot, check the reset to default radio and click Apply.
13. LAN Page
The LAN page lets you set the device’s IP address. The device can be configured to use an
automatic (DHCP) address or a fixed IP address.
The default IP address is 192.168.2.25.
When the device is in Client mode, the LAN page also provides the MAC cloning option.
It is important that before you configure the SMC WTK-G device (regardless of the mode it is in) to
Automatic IP, you should know how to determine the SMC WTK-G device’s IP address from the
device it is connected to.