User's Manual

4-27ASUS WL-330N3G Mobile Wireless Router
DTIM Interval (1-255) – DTIM (Delivery Trafc Indication Message) is a wireless
message used to inform clients in Power Saving Mode when the system should
wake up to receive broadcast and multicast messages. Type the time interval in
which the system will broadcast a DTIM for clients in Power Saving Mode. The
default value (3) is recommended
Beacon Interval (1-65535) – This eld indicates the time interval in milliseconds
that a system broadcast packet, or beacon, is sent to synchronize the wireless
network. The default value (100 milliseconds) is recommended.
Enable TX Bursting – This eld allows you to enable TX-bursting mode to
improve performance with wireless clients that also support TX-bursting.
Radio Power – Radio Power can be set between 1 to 84 but the default value is
recommended.
Enable Packet Aggregation - This eld allows you to enable Packet Aggregation.
Enable Greeneld - This eld allows you to enable Greeneld.
Enable WMM – This eld allows you to enable WMM to improve multimedia
transmission
Enable WMM No-Acknowledgement – This eld allows you to enable WMM No-
Acknowledgement.
Enable WMM APSD - This eld allows you to enable WMM APSD.
Enable WMM DLS - This eld allows you to enable WMM DLS.