User's Manual

4-15ASUS WL-330N3G Mobile Wireless Router
Based on your site survey of your network facility, make sure that all the ASUS
WL-330N3G sharing the same channel, or channels in close number frequency,
are located far from each other as possible. You can use the site survey utility from
the support CD. Refer to 3.7.2 Site Survey (AP SCAN) for details.
Authentication Method
This eld enables you to set different authentication methods which determine
different encryption schemes. The relationships among Authentication Method,
WPA Encryption, WPA Pre-Shared Key, WEP Encryption, Passphrase, and WEP
Keys are listed in the following table. If all your clients support WPA, using “WPA-
PSK” is recommended for better security.
Aut h enti cati o n
Met h od
WPA/WE P
Enc r ypti on
WPA Pre -Sha r ed
Key Pass phra s e
WEP Key 1-4
Open System None
WEP (64 bits)
WEP (128 bits)
Not required
1-64 characters
1-64 characters
Not required
10 hex
26 hex
Shared key WEP (64 bits)
WEP (128 bits)
1-64 characters
1-64 characters
10 hex
26 hex
WPA-Personal TKIP+AES 8-63 characters Not required
WPA2-Personal TKIP+AES 8-63 characters Not required
WPA-Auto-Personal TKIP/AES/ TKIP+AES 8-63 characters Not required
WPA-Enterprise TKIP 8-63 characters Not required
WPA2-Enterprise AES 8-63 characters Not required
Radius with 802.1x Auto
WEP (64 bits)
WEP (128 bits)
Not required
1-64 characters
1-64 characters
Not required
10 hex
26 hex
WPA Encryption
When “WPA-Personal”, “WPA2-Personal”, or “WPA-Auto-Personal” authentication
method is used, TKIP (Temporal Key Integrity Protocol) and AES encryption
schemes are applied.
When “WPA-Enterprise” authentication method is selected, TKIP encryption
scheme is applied.
When “WPA2-Enterprise” authentication method is selected, AES encryption
method is applied.
WPA Pre-Shared Key
Select “TKIP” or “AES” in the WPA Encryption, this eld is used as a password to
begin the encryption process. 8 to 63 characters are required.