User's Manual

4-11ASUS WL-330N3G Mobile Wireless Router
2. Specify a network name or SSID (Service Set Identier), which is a unique
identier attached to packets sent over WLAN.
3. Select a security level to enable encryption methods.
4. From the available list of devices, select the device you want to connect to.
You may add a device if you cannot nd the device you want to connect to in
the list. Refer to To add a device to the list.
5. Click
Connect.
To add a device to the list:
1. In the Hotspot page, click
Add. The Add Preferred Wireless Network pop-
up window appears.
2. Specify a network name or SSID (Service Set Identier), which is a unique
identier attached to packets sent over WLAN.
3. Select an authentication method:
Open System
Shared system
WPA-Personal
WPA2-Personal
4. Click
Connect. The device will now be displayed in the list.
To congure the ASUS WL-330N3G in Hotspot mode:
1. Click the
Hotspot tab. The Hotspot page appears.