User's Manual

4-6 Chapter 4: Configuration
2. Specify a network name or SSID (Service Set Identier), which is a unique
identier attached to packets sent over WLAN.
3. Select a security level to enable encryption methods:
Low (Open System)
Medium (WEP-64bits)
Medium (WEP-128 bits)
High (WPA-Personal)
4. Click
Apply to save the settings.
For more details on setting up the advanced functions, refer to the section 4.3
Advanced Setting.
4.2.2 Access Point (AP) mode
In the Access Point (AP) mode, you can connect the Ethernet port and your
wireless devices into the same local area network (LAN).
Wireless computer
WL-330N3G
To congure the ASUS WL-330N3G in Access Point/AP mode:
1. Click the
Access Point tab. The Access Point (AP) page appears.
After setting the ASUS WL-330N3G in Router mode, you need to connect
the WL-330N3G’s LAN port to an ADSL modem through Windows
®
Zero
Conguration or your wireless card utility on your PC.