User's Manual

3-24 ASUS USB Wireless LAN Adapter (WL-160g)
Software support
3.4.3 Monitoring a connection
To monitor a connection:
1. Select the connection from the list.
2. Click Command from the menu bar, then select monitor. You may also
press <Ctrl> <M> in your keyboard.
The Monitor window appears.
The following connection parameters are displayed in graphical
representation.
SNR. This indicates the quality of communications within the current
network. The communication quality is based on signal level and noise
level measurements. The higher the SNR, the better the connection
quality.
Communication Quality. This indicates the communication quality of the
Basic Service Set to which the station is connected.
Signal Level. This line specifies the average signal level of the Basic
Service Set to which the station is connected.