User's Manual

2-4 ASUS USB Wireless LAN Adapter (WL-160g)
Installation
2.3.1 Wall mounting
Aside from desktop placement,
you may install the ASUS USB
Wireless LAN Adapter vertically
on a concrete or wooden wall
using the mounting hooks at the
bottom of the device and a
mounting screw.
To mount the device on a concrete or wooden wall:
1. Locate the mounting hook at the bottom of the device.
2. Select an ideal location for the device following the considerations
mentioned above.
3. Tighten a round head screw on the concrete or wooden wall until only
1/4” is showing.
4. Latch the device into the screw.
Adjust the screw if you cannot latch the device or if the screw is too loose.
Install this device at least 20 centimeters from any person to insure that the
product is operated in accordance with the RF Guidelines for Human
Exposure which have been adopted by the Federal Communications
Commission.
2.3 Placement
Take note of the following guidelines before placing the device.
• Place the device on a flat, stable surface as far from the ground as
possible
• Keep the device away from metal obstructions and direct sunlight.
• Keep the device away from transformers, heavy-duty motors, fluorescent
lights, microwave ovens, refrigerators, and other industrial equipment to
prevent interference and signal loss.
Mounting hook