R ASUS WLAN Card WL-138g V2 (For 802.11g and 802.
System Requirements To begin using the ASUS WLAN Card, you must have the following minimum requirements: - Windows XP/2000/ME/98SE - Standard 32-bit PCI Slot - 32MB system memory or larger - 300MHz processor or higher The Product Package When you receive the ASUS WLAN Card package, it should contain the following items: - ASUS WLAN PCI Card - ASUS WLAN Card Quick Start Guide - CD-ROM Disc (Drivers, Utilities, Documentation) If any of the above items are not included or damaged, contact your local dealer f
ASUS WLAN Card
Installing the ASUS WLAN Card Utilities After you have installed the ASUS WLAN Card driver, you can install the WLAN Adapter utilities as shown below. 1. Insert the ASUS WLAN Card support CD and an autorun menu will appear. If your autorun is disabled, double click SETUP.EXE in the root directory of the support CD. 2. From the autorun menu, select your language and click Install ASUS WLAN Card Utilities.
Installing the ASUS WLAN Card Utilities (Cont.) Reading the ASUS WLAN Status Indicators The ASUS WLAN card consists of one LED that indicates the status of the ASUS WLAN Card. OFF: No wireless activity. Blinking: Transmitting or receiving wireless data. Orientating the Antenna The ASUS WLAN Card has one external antenna. It is recommended that you adjust the external antenna straight up for maximum range and higher link quality.
ASUS WLAN Utility Quick Start After installing the ASUS WLAN driver and utility, you may need to make some settings before being able to use your wireless connection.
Additional Information FCC Warning Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
Declaration of Conformity for R&TTE directive 1999/5/EC Essential requirements – Article 3 Protection requirements for health and safety – Article 3.1a Testing for electric safety according to EN 60950-1 has been conducted. These are considered relevant and sufficient. Protection requirements for electromagnetic compatibility – Article 3.1b Testing for electromagnetic compatibility according to EN 301 489-1 and EN 301 489-17 has been conducted. These are considered relevant and sufficient.
