User Manual

16 ASUS SpaceLink WL-100g WLAN PC Card
Chapter 2 - Installation
Chapter 2
2.3.2 Configuring TCP/IP Properties
Windows ME
1. Select “TCP/IP -> ASUS SpaceLink WL-100G WLAN PC Card”.
2. Click Properties button and IP Address tab.
• If your Access Point is connected to a network with a DHCP server,
the default setting “Obtain an IP address automatically” should work.
• If your network does not automatically assign IP addresses, select
“Specify an IP address” and type in the IP address and Subnet Mask
as provided by your network administrator. If you want to route
traffic through an IP sharing device, you have to setup the ASUS
SpaceLink PC Card in the same Subnet as that of Access Point.
2. If IP information is required, you can enter
it in the “Alternate Configuration” in XP.
1. This works for DHCP enabled networks.
Windows XP
2. The numbers here are for example only.
1. This works for DHCP enabled networks.