User's Manual

Introduction 第 51 頁，共 224 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30
This section describes how to connect to a network (for example, a company LAN or a personal
home network) using a PAN profile-compatible access point.
Please refer to "Using an access point (LAP) to connect to a LAN" if you are using a LAP profile-
compatible access point.
→Setting up the access point
→Connecting to a LAN (PAN)
z The access point must be started and a normal connection already established to the
network before the access point is set up. Please refer to the access point instruction
manual for information on how to set up the access point.
z A Bluetooth passkey (PIN code) is required for you to connect to the access point. Please
make a note of your Bluetooth passkey before you start the set-up process.
1. Turn on the access point, and confirm that a connection has been established with the
network
2. Right-click the Bluetooth icon in the task tray, and then click on [Add New
Connection]
Important
Setting up the access point
Procedure
Connecting to a LAN using an access point (PAN) [PAN]