User's Manual

Introduction 第 77 頁，共 224 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30
This section describes how to send a fax using a mobile telephone as a modem.
→Setting up the mobile telephone
→Installing a modem
→Setting fax information
→Sending a fax
→Receiving a fax
z Please ensure that any drivers used to connect the PC to the mobile telephone have been
installed.
z A Bluetooth passkey (PIN code) is required for you to connect to the mobile telephone.
Please make a note of your Bluetooth passkey before you start the set -up process.
z A fax application is required for you to be able to send and receive faxes. The description
below is based on a example using Microsoft Fax, which is installed with Windows XP as
standard.
If you are going to use a commercially available fax application , then please refer to the
manual that came with the application for information on how to send and receive faxes.
Set up and register the mobile telephone as a fax service.
1. Turn on the mobile telephone, and set it to be connectable via Bluetooth
{ Please refer to the instruction manual for information on how to operate the
telephone.
2. Right-click on the Bluetooth icon in the task tray, and then click on [Add New
Connection]
Important
Setting up the mobile telephone
Procedure
Note
Using a mobile telephone for fax transmissions [FAX]