User's Manual

Introduction 第 75 頁，共 224 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30
,y
Related topic: "Receiving a fax"
This section describes what to do when a fax arrives after you have established a connection
to a modem station.
z The Fax service must be enabled for receiving in order for you to receive a fax.
Please refer to "Using a wireless modem station " under "Troubleshooting" for
information on how to change the send and receive settings once the fax service has
been configured.
z Please ensure you have connected to a modem station before you receive a fax (the
device will be connected to the modem if "Enable Receive" has been selected or COM
Auto Connect has been activated).
1. When a fax arrives, the Fax Monitor will start automatically as the fax is received
Once the fax has been received, the Fax Monitor will revert to standby mode.
{ If you have enabled manual fax reception, the message below will appear when a
fax arrives.
Important
Procedure
Note
Receiving a fax