User's Manual

Quick Start Guide - Introduction 第 155 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
z Once
y
ou have re
g
istered a mobile tele
p
hone as
y
our fax server
,
y
ou will need to
e
the fax settings from the [Printer and Faxes] window in the Control Panel.
Please refer to "Using a modem station for fax transmissions " for information on
t
configuration procedure.
z The tele
p
hone number of the fax destination ma
y
have been entered incorrectl
y
. Pl
check the telephone number.
z If the setting under COM Auto Connect Settings has been set to "Off"
,
a connecti
o
not automatically be established with the modem. Please connect to the mobile
telephone manually.
z The fax service may not have been enabled for sending (or receiving).
Please check the settings by following the procedure below.
1. Open [Printers and Faxes] from the Control Panel, right -click on the
[
Fax
]
and then click on [Properties]
The [Fax properties] window will appear.
2. Select the [Device] tab, right -click on the modem
y
ou wish to use
,
and the
on [Properties]
Cannot
send
or
receive
faxes