User's Manual

Quick Start Guide - Introduction 第 63 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
Related topic: "Receiving a fax"
This section describes what to do when a fax arrives after you have established a connection
to a modem station.
z The Fax service must be enabled for receiving in order for you to receive a fax.
Please refer to "Using a mobile telephone" under "Troubleshooting" for information on
how to change the send and receive settings once the fax service has been configured.
z Please ensure you have connected to a modem station before you receive a fax (the
device will be connected to the modem if "Enable Receive" has been selected or COM
Auto Connect has been activated).
1. When a fax arrives, the Fax Monitor will start automatically as the fax is received
Once the fax has been received, the Fax Monitor will revert to standby mode.
{ If
y
ou have enabled manual fax rece
p
tion
,
the messa
g
e below will a
pp
ear when a
fax arrives.
Click on the message with your mouse to receive the fax.
2. Double-click on the [Fax] icon in the Control Panel
The [Fax Console] window will appear
Important
Procedure
Note
Receiving a fax