User's Manual

Introduction 第 2 頁，共 224 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30
Next
Bluetooth exchanges data using radio waves.
The following points are critical in order to configure and use Bluetooth devices correctly.
z The devices must be Bluetooth-compatible
z The Bluetooth devices must be close enough to be able to communicate
z The devices must be in a connectable state
z No other radio wave-emitting devices should be operated nearby
z The Bluetooth devices must be turned on
The hardware and software used in your PC and other components must be Bluetooth-
compatible.
Bluetooth-compatible products normally bear the following logo:
For further details, please refer to your local retailer or consult the product instruction manual.
z A Bluetooth communication card, adapter, or other similar device (not included) needs to
be installed in PCs or PDAs (personal digital assistants) that do not have Bluetooth built
in.
Bluetooth devices situated in places beyond the reach of the radio waves will not recognize
each other, making communication impossible.
In
p
articular
,
p
lease ensure that
y
our Bluetooth devices can communicate with each other before
you register and configure them for the first time.
z PCs have a communication distance restriction of ten meters. Please refer to the
instruction manuals for information on the communication distance restrictions s
p
ecific to
each device.
z Communication interference may occur if any obstructions are located between the
devices. Devices may not communicate properly if they have been located, for example,
on the ground and first floors of a residence, despite their being within the acceptable
distance.
The devices must be Bluetooth-compatible
Note
The Bluetooth devices must be close enough to be able to communicate
Note
What you need to know about using Bluetooth