User's Manual

Introduction 第 11 頁，共 224 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh114B.htm 2004/11/30
Methods for registering new devices using the Bluetooth Utility shall now be described.
A Bluetooth mouse shall be connected and set up using [Bluetooth Settings] as an example.
[Bluetooth Settings] provides two set-up methods: "Express Mode" and "Custom Mode."
z Express Mode
[Bluetooth Settings] will automatically detect and register services. If several services
(p
rofiles
)
are su
pp
orted b
y
the device
,
the service that has been set to the hi
g
hest
p
riorit
y
shall
be selected and registered.
Express Mode is normally recommended for device set-up.
z Custom Mode
After having been detected, the services supported by the device are displayed as a list, from
which you can select the desired function(s).
Custom Mode must be used to set up a device if, for example, you wish to use a modem
station to send a fax (because in Express Mode, the DUN profile will be automatically
selected since it has a higher priority than the FAX profile).
The differences between setting up the same device (a Bluetooth mouse) using Express Mode and
Custom Mode are described on the following pages.
z Express Mode Set-up
z Custom Mode Set-up
The procedure for setting up the device using Express Mode shall now be described.
1. Click [Start]→[All Programs]→[Bluetooth]→[Bluetooth Settings].
(Under Windows 2000, click [Start]→[Programs]→[Bluetooth]→[Bluetooth Settin
g
s
]
.
)
{ The same result can be achieved by right-clicking on the Bluetooth icon in the
task tray and selecting [Bluetooth Settings] from the menu that appears.
Starting Bluetooth Settings
Procedure
Note
Basic settings
Express Mode Set-up