User's Manual

43
Settings
Consult your service provider if you don’t know the password.
Barred Dialing
The Security > Barred Dial option enables you
to block dialing of certain numbers. Barred
dialing is a service offered by some service
providers.
To enable the option, highlight the Barred Dial
option from the Security Setup menu and press
the enter key to toggle the option on and off.
NOTE: This option requires a password. Consult your service
provider if you don’t know your password. This function may not
be supported by all service providers.
Change Password
Use the Security > Change Password option
to change passwords for SIM card PINs or for
the phone.
To change a password:
1. Highlight the Change Password option
and press the enter key
2. Select the password you wish to change:
PIN, PIN2, or Phonelock.
3. You are prompted to enter the old
password, then enter the new password.
NOTE: The default phonelock password is 1234. Consult your
service provider if you have forgotten a PIN password or need
further assistance with PIN passwords.
Factory Settings
The Settings > Factory Settings option
restores all settings to factory default, just as
they were when you purchased the phone.
To restore factory default settings:Highlight the
Restore Factory Default option from the
Security Setup menu and press the enter key.
All factory default settings are then restored.
NOTE: This option requires a password. Use the default
password, 1234, to access this setting.