User's Manual
ASUS USB-N10 Chapter 4: Using the ASUS WLAN Control Center
25
Activate Conguration
Auto roaming is enabled by default and
makes the adapter automatically switch to
APs with better signal. You can uncheck it if
you want to connect to a specied AP using
a particular prole.
Status - Connection
You can view the current link statistics about the
Network adapter. These statistics are updated once
per second and are valid if the Network adapter is
correctly installed.
Throughput
• Transmitted
: The number of frames that
were transmitted.
• Received:
The number of frames that were received.
Frame Error
• Transmitted
: The number of frames that were not successfully transmitted
• Received
: The number of frames that were not successfully received.
Connection Quality
• Signal Strength/Link Quality:
Shows the signal strength/link quality of the
access point or Ad Hoc node the Network adapter is currently connected to.
Ratings are: Excellent, Good, Fair, and Poor.
Overall Connection Quality
The overall connection quality is derived from the current signal strength. A graphic
chart uses percentage to show signal quality.