User's Manual

Setting COM Auto Connect
The Auto Connect mode will normally be enabled when you set up a fax transmission (a
connection will automatically be established to the modem when you try to send a fax).
If the fax transmission fails, the PC will automatically attempt to re-send the fax;
however, if the Auto Connect mode has been enabled, transmission errors will repeatedly
appear if the PC cannot establish a Bluetooth connection to the modem relatively quickly.
In such cases, please deactivate the Auto Connect mode as instructed below.
Procedure
1. In the [Bluetooth Settings] window, click on [File] [COM Auto Connect
Settings]
The [COM Auto Connect Settings] window will appear.