User's Manual

Receiving a fax
This section describes what to do when a fax arrives after you have established a
connection to a modem station.
Important
• The Fax service must be enabled for receiving in order for you to receive a fax.
Please refer to "
Using a wireless modem station" under "Troubleshooting" for
information on how to change the send and receive settings once the fax service
has been configured.
• Please ensure you have connected to a modem station before you receive a fax
(the device will be connected to the modem if "Enable Receive" has been selected
or
COM Auto Connect has been activated).
Procedure
1. When a fax arrives, the Fax Monitor will start automatically as the fax is
received
Once the fax has been received, the Fax Monitor will revert to standby mode.
Note
o If you have enabled manual fax reception, the message below will appear
when a fax arrives.
Click on the message with your mouse to receive the fax.