User's Manual

Using a modem station for fax transmissions [FAX]
This section describes how to send a fax using a Bluetooth wireless modem station.
 Setting up the modem station
 Installing a modem
 Setting fax information
 Sending a fax
 Receiving a fax
Important
• Please refer to the modem station instruction manual for information on how to
connect the station to a telephone line.
• Please ensure that any drivers used to connect the PC to the modem have been
installed.
• A Bluetooth passkey (PIN code) is required for you to connect to the modem
station. Please make a note of your Bluetooth passkey before you start the set-up
process.
• A fax application is required for you to be able to send and receive faxes. The
description below is based on a example using Microsoft Fax, which is installed
with Windows XP as standard.
If you are going to use a commercially available fax application, then please refer
to the manual that came with the application for information on how to send and
receive faxes.
Setting up the modem station
Set up and register the modem station as a fax service.
Procedure
1. Turn on the wireless modem station