User's Manual

Connecting to a LAN using an access point (LAP)
[LAP]
This section describes how to connect to a network (for example, a company LAN or a
personal home network) using a LAP profile-compatible access point.
Please refer to "
Using an access point (PAN) to connect to a LAN if you are using a PAN
profile-compatible access point.
 Setting up the access point
 Connecting to a LAN (LAP)
Important
• The access point must have been started and a normal connection already
established to the network before the access point is set up. Please refer to the
access point instruction manual for information on how to set up the access point.
• A Bluetooth passkey (PIN code) is required for you to connect to the access point.
Please make a note of your Bluetooth passkey before you start the set-up process.
Setting up the access point
Procedure
1. Turn on the access point, and confirm that a connection has been established
with the network
2. Right-clicktheBluetoothiconinthetasktray,andthenclickon[AddNew
Connection]