User's Manual

Note
• PCs have a communication distance restriction of ten meters. Please refer to the
instruction manuals for information on the communication distance restrictions
specific to each device.
• Communication interference may occur if any obstructions are located between
the devices. Devices may not communicate properly if they have been located, for
example, on the ground and first floors of a residence, despite their being within
the acceptable distance.
The devices must be in a connectable state
The Bluetooth devices must recognize each other in order to be connectable for use.
In certain devices, simply turning on the power will not produce a connectable state.
Moreover, the energy-saving feature may come into effect after a certain amount of time,
which will prevent the devices from being detected. Please refer to the specific product
instruction manual for further details.
No other radio wave-emitting devices should be operated nearby
Microwave ovens, wireless LANs and other radio wave-emitting devices located nearby
may affect Bluetooth communication.
Please ensure that your devices have been accordingly situated, and that the above
devices are not in use when you are operating your Bluetooth device.
The Bluetooth devices must be turned on
Bluetooth cannot be used if the devices have not been turned on.
Some PCs and other components have a Bluetooth communication switch that operates
independently of the main power. Bluetooth cannot function if this switch has been
turned off.
•
Using PCs with Bluetooth built in
• When using a Bluetooth USB adapter or SD card